with American products
w/ American products
More About Hybrids »
The 15x20 pergolas on this page are 15 feet wide and 20 feet deep. The width and depth are not interchangeable. Attached pergolas are mounted to the house on the 15-foot width side and come 20 feet out from the house. For free-standing pergolas, the angled shade purlins run the 15-foot width of the pergola (as shown in this illustration) and therefore provide the most shade when the evening sunlight comes from the 15-foot width side. Click here to see our pergolas with the dimensions reversed.
You're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsAll of the pergolas featured on this page have a 15' x 20' pergola roof covered by shade purlins, not including the end caps on traditional-style pergolas (which extend 12 inches beyond the ends of the 15' beams and the 20' rafters, unless you opt for flat end caps). So for all of the 15-foot by 20-foot pergolas on this page, the beams and shade purlins are all 15 feet long (as they run the 15-foot width of the pergola), and the rafters are 20' long (as they run the 20-foot depth of the pergola), not including end caps.
The posts (i.e. columns) of a traditional 15' x 20' pergola can be placed anywhere from 0" to 36" in from the outside edges of the beams and rafters (not including the 12" end caps), as shown in this diagram. Most customers choose to place the posts 12 inches in from the ends of the beams/rafters, which puts the outside edges of the posts 13 feet apart width-wise and 18 feet apart depth-wise. But again, you can position the posts anywhere from 0 to 36 inches in from the ends of the beams/rafters to create your desired overhangs. It's also worth noting that the overhang can be different on one side than it is on the other sides, if needed or desired.
For modern-style 15x20 pergolas (which never have overhangs), the posts are always in the corners. So for modern pergolas, the outside edges of the posts will be 15 feet apart width-wise and 20 feet apart depth-wise.
To make our pergolas as affordable as possible, we only manufacture the beams, rafters, purlin holders and shade purlins in 2-foot increments. All of the kits on this page actually have 16-foot beams and shade purlins, which you will need to trim down to 15 feet (using a basic circular saw or miter saw) in order to create a 15x20 pergola. If one or both of the width/depth dimensions of your outdoor space is slightly shorter than 15 feet by 20 feet, you can cut any of the pieces down to the exact length required. So the 15x20 pergolas on this page can easily be turned into 14.625-foot by 19.75-foot pergolas (or whatever specific dimensions you need).
Please be careful when ordering your pergola. A 15x20 pergola is not the same as a 20x15 pergola.
The attached 15x20 pergolas on this page will attach to your home on the 15' side and come 20' out from the wall. For free-standing 15 x 20 pergolas, the shade purlins (which create shade underneath the pergola) must run the 15-foot width of the pergola. So to maximize the pergola's shade, you will want to orient the pergola such that the evening sunlight comes from the 15-foot width side. If your evening sunlight will come from the 20-foot side, you'll want one of these 20x15 pergolas instead.