with American products
w/ American products
More About Hybrids »
The square 13x13 pergolas on this page are both 13 feet wide and 13 feet deep, making the width and depth interchangeable. See below for information about roof size and post (column) placement.
You're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsYou're currently viewing the Description tab. Please note that there are several other tabs: CAD Drawing, Video, Picture Gallery, Q&As, Shippi...
View full detailsAll of the pergolas featured on this page have a 13' x 13' pergola roof covered by shade purlins, not including the end caps on traditional-style pergolas (which extend 9 inches beyond the ends of the 13' beams and rafters, unless you opt for flat end caps). So for all of the 13-foot by 13-foot pergolas on this page, all roof components (including beams, rafters, purlin holders and shade purlins) are 13 feet long, not including end caps.
The posts (i.e. columns) of a traditional 13' x 13' pergola can be placed anywhere from 0" to 36" in from the outside edges of the beams and rafters (not including the 9" end caps), which puts the outside edges of the posts 11 feet apart both width-wise and depth-wise. But again, you can position the posts anywhere from 0 to 36 inches in from the ends of the beams/rafters to create your desired overhangs. It's also worth noting that the overhang can be different on one side than it is on the other sides, if needed or desired.
For modern-style 13x13 pergolas (which never have overhangs), the posts are always in the corners. So for modern pergolas, the outside edges of the posts will be 13 feet apart width-wise and depth-wise.
To make our pergolas as affordable as possible, we only manufacture the roof components in 2-foot increments. All of the kits on this page actually have 14-foot roof components (including beams, rafters, purlin holders and shade purlins), all of which you will need to trim down to 13 feet (using a basic circular saw or miter saw) in order to create a 13x13 pergola. If one or both of the width/depth dimensions of your outdoor space is slightly shorter than 13 feet, you can cut any of the pieces down to the exact length required. So the 13x13 pergolas on this page can easily be turned into 12.625-foot by 12.75-foot pergolas (or whatever specific dimensions you need).